WEKO3
アイテム
ナノファイバインプリント樹脂型粉末射出成形による高アスペクトマイクロ構造体の創製
https://kindai.repo.nii.ac.jp/records/13968
https://kindai.repo.nii.ac.jp/records/1396887b6eebc-aaeb-448e-8c15-627ddf34e9c0
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
|
Item type | 研究報告書 / Research Paper(1) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
公開日 | 2014-09-29 | |||||||||
タイトル | ||||||||||
タイトル | ナノファイバインプリント樹脂型粉末射出成形による高アスペクトマイクロ構造体の創製 | |||||||||
その他(別言語等)のタイトル | ||||||||||
その他のタイトル | Fabrication of High Aspect Micro-structured Parts by Nano-fiber Imprinting Plastic Molding | |||||||||
著者 |
西籔, 和明
× 西籔, 和明
|
|||||||||
言語 | ||||||||||
言語 | jpn | |||||||||
キーワード | ||||||||||
主題 | 粉末成形, ナノ粉末, ナノファイバ, マイクロ構造体, 転写性, コンタクト印刷, ナノインプリント, 犠牲樹脂型 | |||||||||
資源タイプ | ||||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_18ws | |||||||||
資源タイプ | research report | |||||||||
著者(英) | ||||||||||
en | ||||||||||
NISHIYABU, Kazuaki | ||||||||||
著者 所属 | ||||||||||
近畿大学理工学部; 准教授 | ||||||||||
著者 役割 | ||||||||||
研究代表者 | ||||||||||
著者 外部リンク | ||||||||||
関連名称 | https://kaken.nii.ac.jp/d/r/30208235.ja.html | |||||||||
版 | ||||||||||
出版タイプ | VoR | |||||||||
出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||||
出版者 名前 | ||||||||||
出版者 | 近畿大学 | |||||||||
書誌情報 |
科学研究費助成事業研究成果報告書 (2013. ) p. 1-5, 発行日 2013-01-01 |
|||||||||
抄録 | ||||||||||
内容記述タイプ | Abstract | |||||||||
内容記述 | 研究成果の概要(和文): 本研究は, エレクトロスピニング(ES)ナノファイバによるインプリント(NFI)樹脂型の製造法を提案し, 得られたNFI樹脂型にナノサイズの粉末からなるペーストを充填し, 脱脂・焼結を経て数ミクロン程度の高アスペクト比のマイクロ構造体を得る新規のプロセスを開発した. 最小幅1μm,高さ10μmの微細構造(ラインアンドスペース, 円柱, 円孔)を有するNFI樹脂型の作製に成功した. そのNFI樹脂型に, サブミクロン級のニッケル粉末や酸化チタン粉末と水溶性バインダを混練したペーストをコンタクト印刷し, 溶媒脱脂後に健全な脱脂体を得て, それを高温焼成して微細構造を有する焼結体を得る過程での形状変化について調査した. 研究成果の概要(英文): This study aims to fabricate the micro-structured parts using nano-powder via compaction process by printing. The sacrificial plastic mold (SP—mold) which is derived from melting nanofiber produced by electron spinning (ES) method which provides a simple and versatile method for generating ultra-thin fibers using variety of materials is used. The original form made of silicon has micro-sized structures with line and space patterns, circular hole or column. The material used for printing is the mixture of nano-scale Ni or TiO2 powders and water-soluble binder. It was shown from the results of surface observation that the SP-mold with micro-structures of 1micron wide and 10 micron high in minimum size could be obtained finely, and also the sound sintered parts were obtained. | |||||||||
内容記述 | ||||||||||
内容記述タイプ | Other | |||||||||
内容記述 | 研究種目:基盤研究(C); 研究期間:2011~2013; 課題番号:23560107; 研究分野:工学; 科研費の分科・細目:機械工学・機械材料・材料力学 | |||||||||
資源タイプ | ||||||||||
内容記述タイプ | Other | |||||||||
内容記述 | Research Paper | |||||||||
フォーマット | ||||||||||
内容記述タイプ | Other | |||||||||
内容記述 | application/pdf |