@article{oai:kindai.repo.nii.ac.jp:00013795,
 author = {京極,  秀樹 and 生田,  明彦 and 上森,  武 and 白地,  貴之 and 吉川,  研一 and 大森,  整},
 journal = {近畿大学次世代基盤技術研究所報告, Kinki University Research Institute of Fundamental Technology for Next Generation},
 month = {Jun},
 note = {[Abstract] In this study, the fabrication conditions of WC cemented carbides by direct selective laser melting were investigated. The effects of additives, such as Co, Cu-20％Sn and Cu powders, and laser melting conditions on laser scanning process were examined to fabricate a sound laser-scanned body of WC cemented carbides. The optimum laser power, scan speed and scan pitch were found out by experiments. It was found that the continuously smooth single-scan track can be obtained at a lower laser power and a higher scan speed by the addition of 30％ Cu powder. The smooth surface of the laser-scanned body could be fabricated at a laser power of 9 W, a scan speed of 20 mm/s and a scan pitch of 0.05 mm., application/pdf},
 pages = {95--100},
 title = {〈原著論文〉超硬合金のレーザ積層造形},
 volume = {2},
 year = {2011},
 yomi = {キョウゴク, ヒデキ and イクタ, アキヒコ and ウエモリ, タケシ and シラチ, タカユキ and ヨシカワ, ケンイチ and オオモリ, ヒトシ}
}